HSC32 Carb Rack Bench Stand

I designed this stand because I was sick of having carb racks and carb bodies rolling around the bench.

I glued on some numbers so that I could keep my bearings straight whichever way I was looking at them.





With the little spacer block added they work well for holding bare carb bodies:


And it turns out nice for holding them on the shelf too:

 

That is totally awesome. I wonder if I could drill holes for the drain ports and use this for setting fuel levels. Provided I could level the bench it sits on, of course.

 

You could probably make it work - but anything worth engineering is worth over-engineering. So I have a different solution for that.

This monstrosity is designed to hold the rack while wet-setting the fuel levels and allowing access to remove the bowls and adjust the floats:
https://www.xjbikes.com/forums/threads/hsc32-carb-stand.131543/

 

Well how bout them apples. Should’ve checked through the other posts too. I built a makeshift carb rack out of PVC pipe when I set my fuel levels. It works, but it’s fiddly and hard to level properly. Yours looks like a way more elegant solution.