See my thread: http://www.xjbikes.com/forums/threads/signals-not-flashing-horn-not-working-when-stopped.92456/ I had similar issues with other...
I bought a Yamaha OEM large O-ring oil seal (93210-87723) and that solved my leak problem. Unfortunately, the FRAM O-ring (from filter CH6003) ,...
Is it just me or are the provided o-ring seals provided by FRAM (ch6003) bad? I'm talking about the larger o-ring seal that comes folded in the...
SO, my motorcycle steering is 'binding'. it's still ridable but it won't be safety certified. Question is, is the model have loose or cartridge...
I know this is an old thread but I changed the fusebox today (and installed new connectors) to prep for summer. Solved my signal problems during...
If my water levels are always low on my battery (in the summer and about 3/4 full), does that imply that it's overheating and i have to change my...
I was looking at this thing last night and was wondering how the hell do you adjust tighten the stopper bolt and nut with a torque wrench being in...
Hang on, i have a 81 XJ 650. Is there a specific intake for the vacuum line? I believe mine is on 3 or 4. (going from left to right, where leftest...
I have a 81 xj650. it's making some kind of 'noise' sounding like the cam chain tension has to be checked. I have a Haynes manual and it says to...
The saga continues. Shoddy work but... Changed to a (new) 1000uf 16v capacitor and didn't improve it. Then swapped with a 150 ohm (2w) resistor...
