OCC is based out of New York. maybe different laws. :)
i dont have a speedo (or dash) on my xj750 seca. and im thinking about buying a round replacement speedo. i noticed that in the catalogs it has a...
Oh and before putting.boot back on. Clean the area where the gasket will go. Any bumps or dirt can hurt the seal.
As long.as the gaskets didn't tear you should be alright. Try to torque the boots down according to the manual if possible. Careful not to break...
Is it gaskets or an o-ring behind the manifold boots?
Sorry for the.crazy punctuation. Typed.this all from a phone.
Check your intake manifolds. Are.they cracked? Examine them.carefully. did you replace your vacuum line back onto the.intake.boot it was attached...
Did you pinch your throttle cable under your tank. Check that first.
The screws are to stop the vacuum. Only take off one hose with a screw in it. Leave other one in. It doesn't matter which one you remove or which...
are you absolutly sure that its running on all 4 cylinders? also how cool are we talking? like after the bike has been running for 3 minutes...
take a flashlight and inspect tank carbs very carefully and look for any gas leaks. rub your finger around float bowl of carbs, carb overflow,...
ive tested the kill switch on the right handlebar with a multimeter and seems to have a solid connection. but who knows. any clue what this...
sounds like your main jets are clogged. how long was it sitting before it last ran well?
