The financial and emotional costs of the bad decision to not wear a helmet are staggering .... just like many other bad decisions millions of...
Although not an "expert" (I've only pulled mine apart twice) the metal components of your carbs should all be reusable, unless there is severe...
Front brake rebuild is the next project. I might have glazed the rear pads already. I had then adjusted just shy of rubbing and they definitely...
Well, the posts on this site started to scare me enough that I installed a new set of rear brakes on the bike. It's almost assured they were the...
Even using the 20W50 oil, be sure the oil is "conventional" auto oil or oil specifically for motorcycles. My clutch was slipping after I rebuilt...
You can get BullDog Plastic Bumper Stripper for use on plastic parts. Always test in a small hidden area first to ensure it does not melt the...
Your biggest problem is almost certainly the carbs are still dirty. There are several threads on this site dedicated to the excruciating details...
Although I always wear a full face helmet and always will, I am totally opposed to being MANDATED to wear a helmet by the law. In my opinion, it...
Re: Bike will not failed to start on me tonite, opinons on w RickCoMatic's suggestion to check the gas is not necessarily as stupid as it sounds....
Floats were set using the clear tube method. I'll look into a home mad manometer as I bought about 3 feet of clear tubing for setting the floats.
I've just finished a very, very, very thorough cleaning of the carbs and then a bench sync according to the threads on this site. I made sure the...
Damn, and here I thought I had contributed something useful. jmd_forest
I rebuilt the petcock last year using the instructions on this site but never got it working correctly. Fuel ran all the time on all settings....
