I haven't been able to get the cylinder head covers off to look at the drain hole. All I have are simple allen wrenches, and the bolts are too...
Pictures of it in my gallery.
This bike is a great project bike. It was my daily driver for a year. It runs great, but currently won't start due to wet spark plugs. I changed...
The gear doesn't want to come off, and I'm afraid to pry real hard to get it off. I don't know if I can fix it, maybe I should just sell the...
All I have to get the covers off the cylinders is an allen wrench. The bolts are on there very tight, and painted over. I can't get them loose....
Ok, so here are a couple of pics of the metal gear to the water pump. You can see how it is extended past the plastic gear. In the video you can...
Ok, here's the latest. I put silicon around the gap of the thermostat housing and it seemed to be holding, until I checked it today and there is a...
Thank you so much for going through all this for me, man. It has been kinda wet here in Tulsa, so I'm having trouble finding time to get out and...
I will try to take a video of it with my phone and post it on youtube.com for you guys to see what's going on with the water pump. I will post the...
It has nothing to do with the O-ring, I made sure the new thermostat was properly installed. It's got to be because of that bolt/screw that...
Designer Mike, I can't thank you enough for your help. I didn't know that the shaft was supposed to float, so that makes me feel better. I did...
Got the thermostat housing back on with the Motorad 2040-180 installed. Now, the thermostat housing is leaking. Looks like it will have to be...
Ok, I had to take the whole thermostat housing off the bike to get the thermostat out. It is a PITA! One of the bolts that keeps the housing shut,...
The radiator is cooler when there is no rattle and hotter with the rattle. But it doesn't seem to overheat when the rattle is not there. The gauge...
