I shortened the kick stand about 2" which was perfect for a 3 1/2" drop. I took the 2" out of the straight part nearest the pivot. I saved the...
I lowered my bike 3.5â€. I am barely man enough to get it on the center stand. Anyone have pictures of a modified center stand? Looking at it,...
On a 1981 650 XJ, oil is leaking out of the tack connection where it attaches to the motor. How do I stop leak? Other than run out of oil :lol:
What metal gauge thickness did you use for a seat pan?
I wanted a louder horn. I bought a 130 db horn and a relay. I wanted to install it in the stock position. I ran a wired directly from the...
I thought about folding up a small metal box. Cutting four holes the same size and spacing as the original air box. Using the same boots....
As shown rejetting was not require? Are you 3 turns out? I want to do the same thing but I was thinking about using two pods and big copper...
On a 82 550xj, I started at 3 turns out and it ran great once sync. I started to clean the pilot jets but ended buying and replacing all four....
It sure is a lot harder to find short shocks than I expected. Went to two junk yards measured every one they had; all over 11". Called six...
In order to change the angle of the forks has anyone made a triple tree? An example of a welded design is enclosed.
It is a 550 (chain). Anyone stretch a 550xj?
I really like your bike. I am looking for advice. If I were to cut the swing arms and add about 12†to the length; then weld in new tubes...