Thats why you carry that green slime tire inflator. Then you can get your tire fixed / replaced later. :D
Thats what I intended, thanks Robert.
Incase the yamaha logo is not wanted, although it is obscured, I have made a logo without it. [img] I think it would make a cool sticker too.
I took a quick stab at it. [img] Also, here is a larger one in the png format... http://www.derma-life.com/temp/xj.png Just click to...
Try posting at http://www.3dcommune.com When I was making 3d contend I would post there. Lots of 3d savy folks there and you will get lots...
ya, what happened to the little edit button?
I'd be looking for a un-wanted ground. Typically grounded wired either short out a lot of things or cause a lot of operation symtoms.
I see what you are looking at! That number is for the upside down mounting bolts that go from the head through the cylinder block.
** Cylinder head cap nuts (oil lightly)... 3.5 Kgf/m or 23.1 ft/lbs. I think you were looking at the wrong line. These specs are for both...
I have almost 1/2 tooth movement, That sould be ok for a while?
I posted them here: http://xjbikes.com/Forums/viewtopic/t=1 ... orque.html
Here ya go. [img]
Good, my gut feeling about the tires may have been on the spot. :)
either the paint wasnt mixed well or the spray gun and hopp was dirty with the last paint job.
are you using new or old tires? What type and brand?
