Hi guys, I only ever seen to post when there is a problem so he is another one on the 80 xj650...i had a fuel leak that I fixed the other day (bad...
My 80 does the same thing. I usually open up the housing and clean it during winter maintenence. I also have a bullet connector on the wire that I...
I thought of that and that may be my next step. The thing is it was running great and I had finished a 200 Mike trip to the river. The next...
Yes I am using the copper core wires that came with the CB900 coils. The backfiring through the carb is what leads me to think it is the TCI now...
OK I have finally received the coils (CB900) and mounted them. I mounted them backwards from the original with the secondary leads facing...
They were $35 on eBay. I went with Rod1's idea and bought a pair of honda cb900 Coils. They are 2.5 ohm primary and 13 k ohm secondary and look...
So the used replacement coils I put on last year have crapped out and I need new coils. I'm looking for a cheap new replacement and I have heard...
The socket I used was just a little smaller than the fork tube so it pushed against the outer wall of the seal. Don't hit it too hard or it will bend.
I tap the seal in the outer tube first. After the deal is seated then I assemble the inner tube. You may have to tap the seal in with some...
I use a socket that is slightly smaller than the tube to lightly tap the seal in. The small spring slides over the damper rod that is then...
It had the little spring clamps on it. I changed 3 of the clamps to standard clamps but I had to reuse a spring clamp at the carb inlet due to...
No. I didn't pull the bowls . There was a chunk of rubbery piece of rtv looking stuff clogging part of the line. I have no idea where it came...
The bike is running again! Something was blocking the right hand side of the tee so the only carb getting fuel was the far left one. I got the...
