Hi guys My trike is working fine now, thanks to continued help off here! :D However At the recent MOT (annual Ministry of Transport test here...
Hi, My new engine is a 80 xj650g, just done an oil change (an filter), it takes 2.7L with filter change (as Micarl correctly says), and 2.3l...
I'm in a similar situation Robert, I have a spare set that are suspect to say the least, so I think I'll just give it a go. I'll post my findings,...
Robert, when you say diaphragm use, did Rick just paint liquid tape onto the carb diaphragms? And more importantly.....did it work?
Thanks guys, I'll give it a try with those plugs in, when I finish tidying up the wiring after the PO cut through the wiring loom/harness and...
I've had 95mph out of my trike, There was probably a little more in it. Mailny sits very happy at 70mph (6500 rpm) on the motorway, with still...
Ok, after lots of help from peeps on here (and plenty of swearing and throwing things around in my garage here is as far as I am. After stripping...
Thanks guys, need a couple more tips please. What do you advocate for cleaning the ring grooves? I have heard in the past using one of the old...
Hi guys Below is a picture of my pistons that I took out this afternoon. Number 2 is very tarnished and Number 3 (the one with low compression)...
Cheers Kiwi, I've already done the head, valve stems and seals. I was hoping that was the problem of the low compression but it wasn't :( . I'll...
I'm about to start the job of fixing my engine, Does anyone have any good recomendations for replacement coils. The ones fitted are my second set...
