I thought I learned here that the only XJ's with front running lights were the 1100's and 700's had running lights up front and none had rear...
Benny, First time I tried this I had the same problem. Somehow the next time I got a 21mm to fit on the nut (I think it was 21). Since the...
I had the same problem after a good cleaning of my carbs. Turned out that the enrichment circut on #4 was plugged. The hole in the front of the...
I need to go back and re-synch the carbs with the YICS ports blocked. Did the Manometer Method w/out blocking the ports and while there was...
It was likely built on Oct of 80 for the 81 Model Year.
Everytime a post comes up on the Auto Tensioner reset, I get confused. Statemenst seem pretty consistent on the 2 rotations of the motor in...
6.99 later and I have Turn Signals. Simple as plug-n-play. Altus, thanks for the .02. Cant tell by that pic if one of those filaments is...
Thanks for the feedback. I switched the wires around and interestingly it didn't change a think. No blinky blink and the same straight filament...
Still have a couple questions. I have successfully mounted some K&S front signals and Chacal was right, these don't work on my bike. I get the...
Geez Chacal, Don't you have any good news for me? I originally thought I had an 83 so at first I ended up with round turn signals. Ordered...
Ok, Based on the schematic, it looks like I'm missing a "damper" I'm assuming this is simply some rubber material. Perhaps I can McGyver...
Just recieved these to repace the the missing front signals on my bike. Just looking at them I can see that the OD of the signal is much larger...