My latest battery only made it 2 years before it started to loose charge even while keeping it on a trickle charger. I purposely bought a cheap...
How about $30 for this chain breaker/rivet tool: http://www.cyclegear.com/CycleGear/Acce ... 6518_00000 I used one to do a 530 drive chain...
Cam chains are rivet type...
Should be done at around 1050 RPM not 4K!
Welcome Jesse, very nice specimen you got there, looks very complete. Posting in the chat section is fine. I would go through the carbs to start...
The other guys have given you some good ideas but I'd just like to add...with the foot brake applied, make sure that the cam lever at the drum is...
Do you see those vertical scratches about an inch higher than you're pointing at? If you have any of those in the normal travel stroke of the...
McMaster-Carr 96144A330, package of five socket head class 12, M16-1.5mm bolts for $9 + shipping.
Since it keeps happening in the same place whether you did it or someone else does, I would be suspicious of the channel in the cover that the...
Rotella T 15W40 has an API rating of SM but more importantly it meets the Japanese spec for wet clutches JASO MA. I have been using it in my FZ...
How fast were you going on your trip? Extended distances at high RPM's will consume more oil with a lean running engine. Check the oil again as...
How certain are you that the tiny enrichment jets are clear? Those orifices are very small and can easily get plugged. Sounds to me like your...
I believe the start voltage can drop to as low as 8-9 volts without a problem so your battery should be fine. If you are having cold start-up...
I concur!
