If I get a shim kit with 7.48 mm shims will it work with my X? I need 18 for now and may have to swap out some a second time so a kit makes...
Thanks Dave. Already had it open and was hesitant to go any further. Kinda wishing it was only 2 valve per. Anyhow... tensioner is out and gonna...
Awesome. Thank you, Stu. Makes sense. I need to get a book but have never gotten around to it. And now that I have a little time to fiddle with...
Ok... Removing cam shafts on my 700X has me a bit wired cuz I dont wanna mess things up too badly. Why am I removing the bolts on the gears? And...
Thanks for the replies. It is in fact an X so out come the cams. Hopefully i can swap a couple of the shims out and not need 19. And I just didnt...
Stared at the bike for about 30 min, cussed a little, then checked valve clearances. One is within spec. YAY. I get to change the shims! (grumble...
I got around to checking my valve clearances today... only took a cpla years... anyway Im (not) happy to report that ONE is within spec! WooHoo!...
I think most people here would agree that taking it to a mechanic is part of the problem. And a compression check doesn't tell you what the valve...
If I were to change the mufflers on my bike (I'm not a huge fan of the stock ones) to something off of another bike would I have to rejet the...
Assuming you set the float levels, recheck them. Also check the fuel levels in the bowl with the clear tube method, but 9k is wide open, i dont...
