Hope this will help you sleep better :wink: [img] [img] grz Thijs
Shifting without a clutch is fine on motorbikes if done properly! Since it is a dog engagement constant mesh gearbox there is no real need to...
You're welcome :D. (graag gedaan ;)) Keep us updated with the progress, always nice to see progressing projects! grz Thijs
I agree with a low mileage on the bike the tubes can't be worn, and yes, it indeed makes the bike run rich. But just for reference, at my RF the...
4 to 6 k is right in the midrange right? I would check the emulsion tubes* if they are ovally worn. And the needles themselves if they still have...
0.2568 seconds on the first try. 0.2222 the second one. Without coffee or anything :P. grz Thijs
Brake fluid doesn't lubricate ;). Take out the seals and rub them lightly with the grease on all sides. Then lube the bore and piston itself and...
Did you apply a small amount of caliper (ATE) grease to the new seals and pistons? If you didn't the seals are probably sticking to the piston and...
The odometer is in km/h. Japanese and/or European laws prohibit the display of speeds from 300 km/h and above. Therefore the odometer sticks to...
My sisters bike recently had new tires fitted. We chose for the Bridgestone Battlax BT45, since these tires always worked out perfectly for my old...
On the XJ 700 there are two (one per caliper) anti rattle plates mounted to keep pressure on the brake pads. Perhaps they aren't installed...
Already found something? grz Thijs
Bike sounds healthy to me. grz Thijs
I hope you haven't exchanged the second ring with the first ring, since they are different shapes. (and have a upside and downside too :wink: )...
Another thing just crossed my mind... It could be a plug which belongs in the crankshaft. (on both outsides) For manufacturing purposes they need...
