hey beardking, nope have not had any issues. i'm really happy with the result, except now i have bigger problems to worry about, I just split the...
Re: Bike runs great above 2K, surges at idle, eventually die rick's write-up's are great. thanks for the info blue
No, there is still a reserve. There's a tube inside the screen that goes to the ON setting, and when fuel drops below the tube, it goes to reserve.
I'm not sure, your best bet is to measure the distance between the centers of the two bolts, but my guess is that it should fit
Re: Bike runs great above 2K, surges at idle, eventually die Should I try turning the screws out another turn or so more than 2.5 and see if...
Re: Bike runs great above 2K, surges at idle, eventually die I used to have it at 2.5 turns out, but it was still dying then and it smelled a...
Symptom: At idle, if I don't adjust the idle speed to 1750+ rpms, the engine will sound like its struggling to stay alive and it will eventaully...
For dealing with the gas tank, I just carefully rotated the tank backwards, so it was sitting where the seat was, and just made sure the fuel...
Hey guys, I synced the carbs using two tubings. Although MiCarl brings up a good poitn about not being able to measure the actual pressures, the...
Hey, thanks for the threads links and tips guys, hopefully this will go well
I was contemplating buying a vacuum gauge set when I came across this: www.powerchutes.com/manometer.asp Apparently this method is more...
Also if your needle valves are good, you shouldn't be getting flooding anyways. And if they're not, you probably wouldn't just be replacing the...
Uh, I did mention the cost.. look at the title of the post. And I posted the links to both items. The OEM petcock works fine, but the rebuild...
