'82 XJ 650 parts CHEAP!

moellear, PM sent

 

I am looking for the front and rear rim spacers if you have those that will be killer

 

Thanks again moellear
It was a pleasure to meet you.

Plenty of good parts left guys.

Ghost

 

sorry for a delayed response. no I don't recall ever receiving them so I can't help you out much


UPDATE: I have sold a lot of these parts (more than I thought I would) but there are still several items available. see previous page for prices on the following still available clutch handlebar lever, regulator, centerstand, rear drum brake good pads, front brake rotor, handlebar, forks, chrome air box covers, shaft drive boot, rear brake pedal, rear tire well, differential, valve cover YICS, engine head, oil pump, oil pan, clutch friction plates and hub, clutch engine cover, other motor parts besides tranny gears and shifter forks

i've helped quite a few folks with fair pricing including shipping. not here to make a fortune just get rid of parts so they aren't taking space up in the barn. someday I'm gonna have to move outta the house and dad isn't gonna want these parts leftover

 

ahem *cough* these parts should go *cough*

seriously, anyone? also, hope you other fellas got your parts by now. haven't heard from anybody in a while.

whelp, guess I'll be out in the barn fixin my richness problems on the '81 and thanks to all who've been helping me and BillB. we seem to have have similar problems

 

PLENTY of nice parts still around on the shelf! most pictures are on my photobucket album and/or previous pages this thread. since the motor is split in half (tranny gears and shifter forks gone) thought I'd snap a few pics of it as well. shipping on these bigger pieces will cost $ obviously but I'm considering your offer FlyGp. others let me know if I can help you out as well! as always, the parts have gone CHEAP to those already purchased some stuff from me. ($13 for an airbox SHIPPED... fyi already sold)

 

looking for PAPER valve cover gasket on my '81 650. just happen ask if anyone has an extra one by accident when they needed a rubber one for the '82 possibly. just thought I'd ask and no I already know chacal has them in stock (email sent). not looking to save a lot of $$$ just wondering if anyone else had one they didn't need possibly

plus, my parts are still for grabs. nobody has had any interest in a while

 

What shape is the clutch assembly in? Price for assembly (including basket)?
I've got a cheesy paper valve cover gasket but I think it's for a non-YICS head. Dont' think it would do you any good.

 

actually that's the kind I'm after since mine is non-YICS. how much for it? or else we could do a trade for any of my parts please let me know either way Robert... PM me

sorry though, MiGhost has already planned to purchase the clutch assembly with basket next time he travels in my area. we have tentative plans to meet somewhere nearby.

 

STILL UP FOR SALE CHEAP :

 

I'm interested in a 5G2-10 TCI box. please let me know, thanks

 

How much for the forks shipped to 90034. Are the seals good?

 

I will let you two know after tomorrow afternoon. meeting a member on here with everything and letting him choose what he would like.. saves me shipping hassles. I will respond by PM one way or another

 

bringing this thread back from the dead. I have a black TCI box and will check the #

I found another craigslist bike and willing to part out whatever is available. next posting will have an extensive listing of what I have. ask around; I've sold quite a few items just to get them outta my hands.

got your PM. will check in next 24 hours when uptown again.

pictures come before any purchase is made for anyone's verification on part(s) condition(s)

 

parts available from a 1982' XJ650 Maxim YICS model:

valve cover with 12 bolts and decent donuts SOLD
oil filter housing
bottom half engine case block
passenger peg aluminum braces
rear brake assembly (pads, cover, extension bar, lever)
oil pump & chain
4 header pipes
two cams (exhaust and intake)
handlebar - original size & length
chrome air box covers
front brake caliper
regulator (the grey square block with fins next to TCI)
front rotor
engine head

parts available from a 1980' XJ650 Maxim NON-YICS model:

yamaha front fork emblem
grab bar
straight handlebars
front forks with air nipples
engine covers -
kickstand
centerstand
rubber tank mounts
front brake caliper - SOLD
speedometer cable
triple tree
cam chain tensioner


also available from my side collection of trading parts:

(2) speedometer gear drive units
front forks- seals need replaced


like the thread post states.. "CHEAP!" i would like to get these parts to go. let me know if I can be any help to someone. thanks guys

 

pm'd

dave fox

 

list updated.

I have or will be responding to everyones private messages as well.

 

bump. list updated as well.

I am also interested in trades. Looking for particular valve shim sizes

 

Moellear, what shim sizes are you looking for? Can't remember what I'm going to be pulling, but in a couple weeks I'll have 3 out. I'll look at my parts list when I get home and let you know.

Might be interested in swapping for the front fork emblem. (I know, it won't fit mine.)

 

pm sent

 

starter shipped to 39503?

 

I got a starter but plan to keep that for myself; reason I never put one on the list! Speaking of which the list is UPDATED below!! Holler if you want/need anything if its on the list. It'd be nice to get a few more things outta the barn.

parts available from a 1982' XJ650 Maxim YICS model:

valve cover with 12 bolts and decent donuts GONE=SOLD for $15
oil filter housing
bottom half engine case block
passenger peg aluminum braces
rear brake assembly (shoes, cover, extension bar, lever)
oil pump & chain
two cams (exhaust and intake)
handlebar - original size & length
chrome air box covers GONE=SOLD for $7.50 combined
regulator (the grey square block with fins next to TCI)
front rotor
engine head

parts available from a 1980' XJ650 Maxim NON-YICS model:



yamaha front fork emblem GONE=SOLD for $5
grab bar
straight handlebars
front forks with air nipples
engine covers - others still available but two oil pump covers SOLD for $7.50 combined
kickstand
centerstand
rubber tank mounts
front brake caliper - GONE= great condition, SOLD for $30
speedometer cable
triple tree
cam chain tensioner


also available from my side collection of trading parts:
set of four (4) header pipes from XJ750 exhaust system
(2) speedometer gear drive units
front forks- seals need replaced

 

bump

 

I need a battery side cover

 

its not on the list, and no I don't have one lying around.

Pay attention to the above list I updated tonight with some pictures. Make offers; worst I'll say is no OR just ask for shipping costs

 

Finally got the chance t ocheck out the parts. Everything looks good.

Thanx again
Ghost

 

no problem MiGhost! hope all is well with you. its great to see you back on the site

Everyone, I confused myself. After member asked how the conditions of the 4 headers are, I went out and tried to put them on my engine just for verification. I failed. They are actually from an XJ750. Each header is stamped in sequence from 1 to 4 and they are in decent shape. I updated the list found on the 5th page with two pictures like always!

make offers on anything people!

 

bump

 

Well I am able to keep on selling these parts off slowly (even items like engine case!). Bringing this thread back from the dead since there seem to be a bigger influx of newbies recently.

ALSO: I wouldn't mind having a stock exhaust system in decent condition. I AM OPEN to trades on the following or else make offers peopel! thanks

parts available from a 1982' XJ650 Maxim YICS model:

oil filter housing
passenger peg aluminum braces
rear brake assembly (pads, cover, extension bar, lever)
oil pump & chain
two cams (exhaust and intake)
handlebar - original size & length
regulator (the grey square block with fins next to TCI)
front rotor
engine head

parts available from a 1980' XJ650 Maxim NON-YICS model:

grab bar
straight handlebars
front forks with air nipples
kickstand
centerstand
rubber tank mounts
speedometer cable
triple tree
cam chain tensioner


also available from my side collection of trading parts:

(2) speedometer gear drive units
front forks- seals need replaced


like the thread post states.. "CHEAP!" i would like to get these parts to go. let me know if I can be any help to someone. [/quote]

 

Frame with title?

 

nope no title. but not afraid to sell the title reasonably cheap either. its not going anywhere besides junkyard

 

Do you have the front master cylinder?

 

no front master cylinder.

list is still updated from February 20th posting above

 

how much for the straight handle bars, and engine side covers :?:

 

straight handle bar can go for $15 plus shipping. because of its odd shape I assume UPS is the way to go

decided to keep the engine itself so plan to save the covers. sorry for not updating it sooner.

 

bump

 

BUMP...been awhile since I last updated my list. just checkin to see if I can help anyone out!

parts available from a 1982' XJ650 Maxim YICS model:

oil filter housing with bolt in excellent shape
passenger peg aluminum braces
rear brake assembly (drum cover, extension bar, lever)
oil pump & chain
regulator (the grey square block with fins next to TCI)
front rotor


parts available from a 1980' XJ650 Maxim NON-YICS model:

grab bar
straight handlebars
front forks - seals need replaced
kickstand
centerstand
speedometer cable
triple tree


also available from my side collection of trading parts:

(2) speedometer gear drive units
front forks- seals unknown condition - need to be disassembled from triple tree yet

 

FWIW.......front forks from non-yics model are SOLD.......

 

Do you have the intake cam caps for an 82 650 maxim I need the left side caps.

 

82 650 Maxim needs grommets for side panels, grab bar, speedo drive.

 

PM'd

 

you wouldnt happen to have the cylinder head would you? i know you said the motor was seized but didnt know if you just meant the bottom end

 

NOPE. sold that a few weeks ago and it was YICS 650 engine head. the new owner got a good deal on it. updating the list as it seems to shrink over time. glad to help everyone out!


parts available from a 1982' XJ650 Maxim YICS model:

oil filter housing with bolt in excellent shape
passenger peg aluminum braces
rear brake assembly (drum cover, extension bar, lever)
oil pump & chain
regulator (the grey square block with fins next to TCI)
front rotor


parts available from a 1980' XJ650 Maxim NON-YICS model:

straight handlebars
kickstand
centerstand
speedometer cable
triple tree


also available from my side collection of trading parts:

(1) speedometer gear drive units
front forks- seals unknown condition - need to be disassembled from triple tree yet

 

Thanks for the parts! Haven't yet gotten her to the point of putting them on, and I'll let you know when I do. Great meeting you, too. Hope to go for a ride sometime!

 

Moellear, is that a whole speedo assembly? My needle broke some time ago, and if I could get one cheap I'd probably do it.

 

It was great meeting you as well. Hope the reassembly goes as well as I predict for you. You seem to understand the importance of putting everything back together in a particular order from our discussion so give me a ring if you get stuck anywhere!

the only part associated with a speedometer I have left is a drive unit --> the part that sits in your wheel hub and turns the cable

 

hi my speedo is noisy and i am looking for the speedo tach assembly. mines on a 1982 xj650j with cable driven speedo and electric tach. i also need the front fork caps and the grips on the handlebars need the endcaps too. Let me know,,thanks

 

How much you want for the frame and title?

 

Please, people, just read before posting. That goes for all forum topics whether it be in sell/trade section, xjchat section, or anywhere else on this website. Not just my thread here.

Some people never cease to amaze me...

Grant it my thread lasted 7 pages, over 13000 views, and I may not have updated in the past few weeks, but that's because I seen a lack of interest in the few remaining parts I have left (which was last compiled on June 10th).

Jester; no where did I mention a frame & title even offered.

Wesgmc; still dealing with that noisy speedo tach assembly? You posted over a year ago telling us all your problem. Bigfitz52 has a detailed write-up on how to lubricate it properly, and responded to your posting as well. Have you attempted to do what Bigfitz52 suggested? I was able to tear mine apart and its working better than ever. Front fork caps... I plan to keep on the spare set of front forks that way if the forks would ever be used, the caps would be with 'em. Lastly, I have no clue what you mean by grips needing endcaps. My guess is the grips must not be original stock handlebar grips, and it would almost be cheaper to get a new set from ebay.

Many, many thanks go out to everyone I was able to offer parts at reasonable prices. The remaining parts will most likely be sold at scrap yard or tossed in dumpster, if I feel I would never use them, and get no more responses.