bigfitz52

Hello, I'm looking for a write up on how to add mileage to my replacement xj650 seca speedo.
New speedo is ~7k so I need to ADD mileage to reflect the actual ~13k mileage.
Would you be willing to email me a procedure?
Does it explain how to get the bezel off? Looks like someone tried to pry the one off my old unit.

Robertjunk24@gmail.com

I saw your writeup on the gauge swap. 2 questions how are the gauge bezels removed and ultimately the lens? P/O said they replaced the gaskets, looks like they pried the bezel all the way around. Is this the correct/only way to access the insides?
Also, how is the silk screening on your indicator lights so nice? Most of my lettering is rubbed off. Is there a way to redo it?
FWIW, I have an 82' xj650 seca.

Just bought a 83 Yamaha 750 jya I’m thinking! I need help with how to find the right carbs! Sorry to bother I’m just lost on this!! Thanks!!

Biggie-sorry to bug you - I have a 1981 X550 Seca -replaced shims according to factory specs and at 6000 rpm there is a clacking sound (sorry, can't describe any better), what am I missing? I really like this bike but this frustrates the living daylights out if me.
Thank you for any guidance.

9 digit vin on an old yamaha250cc trail bike is 450-007858 please can someone give me any more info on what this bike is?
It also says 1000cc oil and made in japan on it if that helps

Dear Mr. bigfitz52: Please let the 750 Maxim owners know Mr. Massey has a large crate: Fenders, FootPeg Mounts, Tail Light section & Headlamp Bucket and some orig inal Midnight Badges.... Painted BMW TechnoViolet Metalflake ... for: 19 83 Yamaha XJ750 Maxim -- $85 USD+freight (Or B.O.+freight fm 01821) richardemassey@gmail.com

Howdy! Wanted to see if you could help. I just replaced the clutch plates on my 1982 xj650 and adjusted the clutch to where it should fully disengage but it seems to be slipping. I even loosened the clutch adjustment so there was a bit of slack and it was even lurching forward with the clutch in so I know it wasn't the adjustment of the cable or arm. Still slipping and not sure what to do. If you can help thank!!!

Hey there, need some serious help!! My #3 float bowl starter jet is completely..and I mean completely clogged!! Soaked for 2 weeks and still clogged! What can I do?? Please help me, and thanks in advance for your time.

1983 XJ 550K: I have two of them and one runs perfectly; the other one did until early last summer. It has no spark. All electrical connections cleaned and greased. All components per repair manual I have are satisfactory except starter circuit cut-off relay but does click when the ignition is turned on. All continuity tests ran are satisfactory. Suggestion on possible problem and best manual?

Hey buddy! I'm having a Hard time with the oil seal behind the pick up coils at the left side of the engine of my XJ750... I replaced it about 4 times, but still leaking, should I have to disassemble the engine to replace that seal? It is the one behind the magnetic pick up coils, the oil seal is the 32-45-6.5 2h7, the engine its fine, no cracks in it... Help!

Hey man, wasn't sure who to reach out to but found you at the top of the list. By chance do you know where I can find an air intake jet..I acquired an 81 xj650 and one of the air intake jets is missing on carb #1 any advice or links would be much appreciated..believe it is a #36. Thanks in advance!

Big fits this is what my post was supposed to have been I slid my yics tool down the yics passage in the cylinder head and then it dawned on me that I had to clean it out the passageway now my question is having slid that yics tube down the passage prior to cleaning it out will that clog my start circuit in the cylinder head

Big fits I need your help I sleep my ex tube down my ex chamber and I forgot I had to clean it out right now my question is this with me sliding that tube down that chamber prior to cleaning it out will that called my start circuit passages

Guy I took an 82 xj completely perfect bike an changed the entire electric over to my 85 why am I not cranking off button and y am I not getting fire plz help

Need help with the wiring of my CDI for yamaha XJ750, please!!! 4 pins notch has the signs P+. P-. OUT. IN. 6 pins side says EB. G. IG-2. IG-1. And two blank pins, what does all that means??? The wiring system of my bike was cutted off, so I can not identify the wiring

I have been trying to decode the 9 digit VIN for a Yamaha motorcycle for weeks, I GIVE, can you please decode the following 3G0-001483. I can get it down to 2 positions but give up on trying to do it myself. HELP

Could you help me out with an `82 XJ750 Maxim speedo question. You're inbox is full so it won't let me PM you.

Bigfitz52- wondering if you can help me with an issue on having with my Maxim 700? It has no torque, and while ridding in low gears it rattles and knocks from I'm guessing the transmission, clutch, shifter area. On Center stand in nuetral no noise is heard??

Hey could you send me cable routing for xj750 maxim

Hey I have a 82 xj750 It won’t start not ever with starter fluid it has spark but won’t fire if you could tell me what to look for that would be great thanks