750 Maxim Project

Thanks venlis, I think I am going to make some adapters for the brakes. I have been incredibly busy the bike is a little farther than the pics, just really need to finish up the foot controls, and then spend money on bearings, braided lines, crap like that.
As for the swing arm, I built a jig for it and then cut the stock one all apart, used the 750 pivot, and 1100 axle peices, also running an 1100 diff. I just built the rest of it inbetween. I used 14 ga. sheet metal bent to shape on the one side completely boxed, and a piece of tube for the shaft side.
Hows your bike coming, you used ducati rotors or something if I remember right? What calipers did you use

 

Got a bit done, foot pegs half done, m.c. mounted shifter hooked up. FZ front end.

 

nice going mate

i have brembos off a ducati multistrada. same calipers are on many ducs though. i just found some intake valves and im working on my swingarm too. had to order another final drive since my one is making a nasty sound


yours is looking good!

 

CRAP! I loved your old bike. I missed that you went and did this now. Do you happen to still have those badass sidecovers? If so, I WANT THEM!

 

I like the previous form, but decided to just re vamp this one opposed to buying another. I modified the sidecovers to fit again, all they are is expanded metal, pretty easy to make if you have access to a welding shop, or steel supply place.

Couple more shots of exhaust mock up and rear fender mock.

 

You should have just made new ones and sent the old ones to me I do have a welder, but I haven't taught myself how to use it yet. I guess that would be a good, small project to start on.

 

Haha they would cost more to ship than what it would to buy the material- welding on light material is tougher than thick. The only advice I can give is practice on scrap and get good before you try to actually make something. What kind of welder you have?

 

I bought a cheapo Harbor Freight one, tried to use it once and got frustrated with. I was practicing on sheet metal, because I wanted to repair the floor boards in my Jeep. Then I fond a Lincoln Mig 120 on CL for pretty cheap that came with a decent cart and bottle of gas, so I grabbed that and sold the other one at a yard sale. I haven't even attempted to use the Lincoln and I've had it over a year, but two of my buddies borrowed it for some small jobs on their jeeps, so at least I know it works.

 

Ya those little Lincolns do good on sheetmetal, probly .023 wire. Picked up one up for my brother a while back. Don't use flux core wire.

 

I know flux core is extremely difficult to use on thin sheet metal, but what would you suggest for thicker stuff like the frame if I end up hardtailing one of my projects?

 

The .023 wire will work fine on that Lincoln, the frame isn't that thick on the bike maybe 1/8th wall, just crank it up a little. I was suprise with the versatility really of the Lincoln, supposed to weld up to 1/4 if I remember right. The trick with welding really is setting the wire to your style of welding. If it drops off the end of the welder in little balls, more wire, if it spatters and jumps, less. There is a small window where it will just zing in and it becomes effortless.

 

good deal. Thanks for the info. I should be home from Iraq on vacation in the next week, so maybe I'll break it out and play a little bit.

 

Well, have a good, well deserved, vacation. Stay safe over there.

 

Updates- paint work is done, polished my slide hole on the carbs and the intake horn part of carbs, and an in depth look at where the starter clutch is found.

 

Another shot of the fenders, the rear attatches to the swing arm and the came off an xs 650, I built the body lines with steel to match the front plastic fender off the fz 600, also couldn't resist painting an old helmet to match.

 

nice job on the paint - the matching helmet is badass, haha

 

Ok, I loved the old setup of the bike, but this? THIS is amazing. I still think you should have kept the old one and picked up another to transform like this though. The two versions side by side would kick ass.

FYI.... I am back from Afghanistan and got an apartment in Hagerstown, MD where I'm working now. The wife and kids are still at the NC house along with all my toys. I'll get down there next week, but not sure if I'll have time to play with the XJ.

 

Haha ya nobody will be able to tell its the same bike, it would take too much money to buy another and do this, and maintain the other, so I just decided to go balls out, and do something different with what I had. I sold my stock xj to a friend in the same town, so people in my town will have a reference. I will get side by side with the stocker when things get together and put it up here. I don't think I have ever posted a pic of my old stocker.

Glad youre back safe.

 

Looking good, I like the frame mod and the side pieces. Now THE question, Will it have pods? :lol:

 

I was planning on it with my trademark velocity pod. However, I kind of opened a can of worms for myself with 818 pistons and a ported and polished head. God I love to make work for myself.... :roll:

I am kinda brainstorming a new pvc intake though, I hope to eventually efi this mug, but I kinda dropped my wad to get this far, so that will have to wait for now.

 

Finally a roller again. Slow and steady.

 

wow now that is a different sort of XJ

 

Can you link to some higher resolution photos? I'd like to see some of that up close.

 

WILD transformation! love it.

 

Thanks, what part you wanna see? I think 500x500 size is all I can attatch, haven't figured out how to imbed from the computer.

 

Deleted

 

if you use imgur.com you can link higher res photos - without touching your upload quota on this site.

All 3 really - it looks like quite a well done one-off moto.

 

Sweet, that is huge though!!!

 

If you change the image size to "large thumbnail" its more reasonable.

Where in MN are you located?

 

And the detail on the rim edge is great! Good job on that.

 

Nice Build StreetBrawler...

 

so sick. again. lol

 

Thanks gang. I have to go back into that website to set up a thumbnail or can do it on xj site? Computers not my strong point.

The rim edge is actually cheating by way of decal. I am located south of Rochester in Le Roy. Wheres about are you at? I see you are also a MNer.

 

Eff you Bawler! (Jealous Rage!) I just started my project (82' XJ750) so I started looking at your post for some ideas....HOLY CRAP THIS THING (is it still considered an XJ?) Has gotta be the coolest and most unique transformations of the bike I've ever seen!!! Just awesome! Can't wait to see the next step of this project!

 

X2!!! 8O

 

You have to go back to imgur and choose thumbnail and get the new BB code.

Jeebuz. Now there is a decal that'll add 10+hp. sign me up, I'm sold.

I'm around the cities. We'll have to figure something out so I can take a ride on that beastie... once it has it's powerplant back in.

Keeping the stock motor then?

 

Thanks again gang, big props to this site and len at xj4ever to get it looking and perfoming good.

The decal does give an adittion 10hp look :lol:

The motor is bored to 818cc and has had the head ported and polished. Looked into cams but couldn't bring myself to drop that kind of money. I am hoping that I get a ride this summer yet, time is something that I have no excess of. Praying to do the fall flood run with her.

 

I know you can drop "hotter" Seca cams in... the FAQ section has a compatible parts list -- which parts can move around between bikes and whatnot.

 

Yeah I have read up and I beleive that only the exhaust cam is hotter. My machist didn't reccommend due to the intake exhaust ratio after the head work.

 

any update on this, engine in?

 

Nope.... had a small side project to do, I have a new bath tub in my house. I have way too many projects. I have not quit thinking bout this one though. Soon, I hope. A good solid weekend to work on it is what I need.

 

six months later...how's it looking!?

 

Dang, six months!!!! Looks the same. I guess I really need to wrap it up. lol. Will be this year I promise.

 

Resurrection!! Finally found time, better late than never.

 

Pretty much wrapped up.

 

Looks good, but you need to snag a 900 rear wheel to match that front. Then convert to rear disc. etc...
etc...
etc...

Did you say you were done! :lol: :lol: :lol:
Are they ever really?

Ghost

 

Thanks ghost. I think this project is actually done, the only thing left is ride the hell out of it.

I want to personally thank Len (chacal) at xj forever for his insight and knowledge and endless parts lists. Without him this engine would have been scrapped.