1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

'82 Seca 750 Refresh Project: Now Scooby's Bike

Discussion in 'XJ Technical Chat' started by Nuch, Aug 24, 2019.

Page 16 of 16
  1. Jetfixer

    Jetfixer Well-Known Member

    Messages:
    3,191
    Likes Received:
    1,501
    Trophy Points:
    113
    Location:
    Nothern Indiana
    Do you have a volt meter, if you do unplug the headlight, jumper the plug where relay is located ,turn on ignition . At the headlight plug check with the volt meter and see if you have voltage . Switch the high beam switch on and see if you hsve 12volts . For giggles set volt meter to continuity and test head light posts .
     
    Jetfixer, Apr 4, 2023
    #301
  2. scoobydew

    scoobydew Member

    Messages:
    145
    Likes Received:
    16
    Trophy Points:
    18
    Location:
    new york
    Thanks for the advice, i do have a multimeter

    which headlight plug socket is for positive and which is for negative?

    I'm a tad spooked I might short something
     
    scoobydew, Apr 9, 2023
    #302
  3. Jetfixer

    Jetfixer Well-Known Member

    Messages:
    3,191
    Likes Received:
    1,501
    Trophy Points:
    113
    Location:
    Nothern Indiana
    No ,you will be fine , one wire is black ,one is yellow red , and one is brown or green black is ground and put your positive lead on the yellow red , using a paper clip jumper at the yellow relay . Turn ignition to on and see if you have 12volts , if not flip high beam on and move lead to the other lead on the plug see if you have 12volts.
     
    Jetfixer, Apr 9, 2023
    #303
Page 16 of 16

Share This Page