1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Battery Maintenance Mod ~ Time-saver 750Max - Others.

Discussion in 'XJ Modifications' started by RickCoMatic, Jun 20, 2013.

  1. RickCoMatic

    RickCoMatic Well-Known Member

    Messages:
    13,842
    Likes Received:
    67
    Trophy Points:
    48
    Location:
    Massachusetts, Billerica
    Make getting the Battery OUT less of a hassle.

    12mm Notch in the Battery Case placed above +Positive Terminal.
    Felt added to lower section of the Battery Box.

    [​IMG]
     
    RickCoMatic, Jun 20, 2013
    #1
  2. Polock

    Polock Well-Known Member

    Messages:
    9,751
    Likes Received:
    2,100
    Trophy Points:
    113
    Location:
    Beaver Falls, PA
    i haven't had a stock battery setup for years, what's the notch for?
     
    Polock, Jun 20, 2013
    #2
  3. RickCoMatic

    RickCoMatic Well-Known Member

    Messages:
    13,842
    Likes Received:
    67
    Trophy Points:
    48
    Location:
    Massachusetts, Billerica
    Allows for easily removing and attaching the Buss Bar to the Battery Post.

    Slipping a Wedge under the Rectangular Post Fastener saves a whole bunch of aggravation, too!

    [​IMG]
     
    RickCoMatic, Jun 20, 2013
    #3
  4. Polock

    Polock Well-Known Member

    Messages:
    9,751
    Likes Received:
    2,100
    Trophy Points:
    113
    Location:
    Beaver Falls, PA
    ok, the silly bolt that won't reach down to the nut, i remember those.
     
    Polock, Jun 20, 2013
    #4
  5. MiGhost

    MiGhost Well-Known Member

    Messages:
    1,576
    Likes Received:
    160
    Trophy Points:
    63
    Location:
    Lower 48 in general. Otherwise Central Mitten.
    Then why does every part schematic show the battery with the terminals inward to the back of the battery box?

    Could this have something to do with it?
    5G2-82103-00-00 TERMINAL 1 (Positive) (Expensive)
    15R-82103-00-00 TERMINAL 1 (Negative) (NLA)

    To my understanding (haven't check it on the bike yet as my cables were directly mounted to the battery). These terminals move the cable mounting to the ends of the battery. Placing the positive terminal in the rear, inside position (Positive cable not long enough for the front, outside) in the battery box.

    Which way is the correct mounting position?

    Ghost
     
    MiGhost, Jun 21, 2013
    #5

Share This Page