For Sale XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODELS

Excellent info - great advice - fast service and shipping - exactly the parts I needed! Thanks Len!!

 

Great service, couldn't have been better, new to ordering things online and it worked out great, real helpful, thanks Len

Teddy

 

Jiminey Christmas!!!! My parts got here QUICK! Doing business with Len is a pleasure.

 

Everything is exactly as I ordered and everything fits exactly as it should. A true pleasure to deal with someone who actually knows XJ bikes. I have only found lower prices once and the part that I 'saved' the money on ****ed up my bike and cost me a fortune because it did not fit properly. Do yourself a favour and deal with Len first!

 

XJ 600 51J 1986
front brake switch
any ?

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

I Just ordered my #2 intake valve from xj 4ever and after much help and patience from Len we figured it out i have to give Len and xj 4ever a 5 star rating i have never had so much help and such quick response to my quetions my part is due to arrive Monday or Tuesday...

Thank You Len for all your help i will for sure be getting my parts from you in the future. Next will be re-jetting my carbs if needed.

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Thanks again Chacal for more great advice, parts and service! Great to have a trusted source to help keep these bikes running!

 

Need a run/start/throttle assembly for an 81 xj550.. any chance you have one?

 

Thanks guys for the feedback and for keeping us busy!

Narib...........please send us a PM request thru the website or an e-mail with your request, thanks, just punch one of the buttons below.....

.|
.|
.|
.|
.|
.|
\/

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Did priority shipping and got my stuff in three days. Well technically i have not got the item yet but my dad works at the post office and said everything arrived! Will order from again. Thanks chacal

 

Thanks, Chacal! Ordered late Monday night, my levers, etc., shipped Tuesday and were on my doorstep on Thursday! I will absolutely be coming back for anything else I need!

 

Thanks again Chacal. As usual, no problems with parts and plenty of knowlege to help me get what I needed. Hopefully I'll have my xj back on the road soon, its been too long!

 

looking for taillight and inner fender for 1983 Yamaha Seca XJ900RK.....supposedly the parts are discontinued??

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Chacal is a great resource for XJ parts, there doesn't seem to be anything he doesn't have! Great pricing and very fast shipping....ordered some XJ700X feelers gauges last Tuesday, they were in the mailbox today....the 4th working day after placing my order!!

Thanks Len, I'll be ordering again soon!

Danny

 

Thanks guys for the feedback and support!

Nate, I'll send you a message thru this website's mail system, check your inbox!

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Just got my second order in from chacal and, once again, extremely satisfied with the speed and quality of service. Great selection, great prices, and great service... a rarity!

Thanks again Len!

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Okay. I don't really need to post about how awesome Chacal is, how fast the service is. But I want to. Just received my second order, and I have to say, Len puts up with my million-questions-an-order like a champ! Seriously. A pleasure talking with him. Advice is great and so is the service.

 

Just got the parts for my first valve adjustment, as well as that nifty spin-on oil filter adapter kit. Very quick responses and fast shipping. Plus of course that he has parts that you can't find elsewhere and you know they're the right ones ordering from him.

Thanks!

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Thanks Len,

I saved alot of coin and time with Len's help and parts. He helped me diagnose the electrical problem, showed me what is available for the repair, and shipped out the parts in a timely fashion. I"m in Napanee, Ontario, and I still had the bike on the road within 12 days, including repair time!

We have to support guys like Len. They are hard to find. The response time, knowledge, and prices, makes it easy peasy.

thanks again
Paul
Napanee, Ont

 

Fabulous.Ordered some stuff.Chacal took the time to make sure that the part matched my fairing,rather than taking the money order and running.Verified the part Thursday.I figured that the parts would arrive mid-week.Oh well,had hoped to work on the machine this weekend(I'm a nurse and don't get a lot of w/e's off.)But I figured he was protecting me(kind of like when a clerk checks the signature on my credit card)....Lo and behold the doorbell rings @ 0900 Sat. morning.Credit to FedEx also. Everything was nicely bagged,labeled and the info sheet for the fuse box is very helpful.(Last changed one 4 years ago,could have fumbled along,now I'll be done before noon!! Thanks to Chacal. I'm going to put together my "to do"list for this winter and order the stuff soon.So I can ride on those warm(high 30's-low 40's days),rather than wait for my local Yammie dealer to get around to phoning me to say that that most of the parts I already paid for are on back-order.

 

Great job yet again, Chacal, on having the right parts for these old beasts. Got my bearings and put 'em in, no problems.

 

Great job, Chacal. Got all my parts yesterday, carbs are back together. I should've just ordered from you from the get go instead of wasting time looking for a spare set.

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Just wanted to say thanks Len , couldn't have been happier with the service and fast shipping 5 stars 8)

 

Thanks guys we appreciate your business!

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Can i just say XJ4Ever is a hero to the people.
Order placed on the 26th, part in my hand on the 28th.
The speed of a cheetah chasing a kid in the city, and the accuracy of a well trained sniper takin out a couple of pirates on the high seas.
Thanks again.

 

Chacal,

I have a 1982 Seca XJ550. I was wondering how I go about trying to purchase the rubber boots that go from the airbox to the carbs and the rubber parts that go from the carb to the engine with all hardware included too.

Brendon

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Great service, working with me to help properly size the jets on my HSC33 carbeurators on a 1985 XJ700N that has been bobbed out and frankensteined.
When I bought it, the previous owner had installed pod filters, chopped the mufflers off, yet never upgraded the carbeurator's fuel flow to compensate for the high compression and increased airflow through the pods and unrestricted exhaust. Had stock #107 main fuel jets and #36.5 pilot fuel jets. When I first pulled the spark plugs, I immediately figured the last owner tried to compensate for the airflow fluctuation by increasing the idle mixture screws rates due to the greasy layer on the plugs ( no chocolate boo hoo!). Yet he failed to remove the anti tamper cap from the #4 carb. Wondering what the procedure is to pull one out, as my teachers in the auto shop I'm a student at had no idea.
At this point I've rebuilt the carbs, broke the racks, cleaned all internal reusable parts with chem dip and all passages excpet the #4 idle mixture screw hole , replaced seals and o rings, clunk tested the vacuum piston bores and pistons, checked and cleaned my venturis and butterfly valves, upgraded to size #112 Main Fuel Jets and #39 Pilot Fuel Jets (that #112 looks serious compared to the dinky #107s), checked the specs on my butterfly valve spring sets, cleaned the spring set, and polished the exteriors of the Carb bodies with steel wire brushes of varying diameter and mothers mag/aluminum polish. replaced the hats with new chrome domes and installed new hardware, then re-racked the carbs on a piece of sheet glass with a flat edge ruler to hold the engine side flat while screwing in the lower rack bar with blue threadlocker. will be writing up an article for the forums with pictures once the carbs are finished and synchronized.

 

Hi chacal,

I need the little o-rings on the fuel T and the metal fuel pipes between the fuel bowls on my XJ550 seca carbs. There are 4 o-rings on each so I need a total of 12 o-rings.

Do you have these available?

Thanks.

 

Hey World, just send us an e-mail or a PM and we'll get you all the info!

 

All I can say is XJ4everis 4EVER!! in my book!

Len helped me out with advice and recommendations for my 82 xj650 project. I needed brake lines and a tach cable. He mentioned the crush washers, which I didn't even think about, saving me more days of waiting for parts. AND - get this - I ordered them on a Wednesday and the parts were at my house when I got home on Thursday!!! I wasn't expecting them until, at the earliest, Saturday!!!

Again, all I can say is WOW. I kn ow where I will be getting my parts from now on.

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Customer service is the best. Products are just as expected and shipping yes it is fast. Knowing you can count on a supplier to sell just what you need and do it the right way, means everything. XJ4ever, thank you for helping me keep my Maximator fully functional.

 

Chacal Rocks! Placed my very first order with him and then another a few weeks later and everything was spot on! Delivery was as expected!

Will continue to shop locally (with chacal that is...!).

 

1983 xj900 seca for sale. Quit running a couple weeks ago. Tired of the upkeep. $900 south Georgia. No title just bill of sale. Complete bike. Call Cory at 229-401-8497

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Chacal, I received my parts 7 days after placing my order!

Thanks again....

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Chacal

Recieved the tank many thanks

Daz

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Len,

I received the parts I ordered, no problems.

Thanks,

Tom

 

Len you the man thanks again. As always perfect parts and perfect service The info and help you give on top of it all makes you one of a kind.

 

Len

My parts arrived today.

Thanks for the help correcting my part number list and getting me the correct stuff, I will never get that type of service from another vendor.

The starter rebuild kit is perfect, even has the bushings and the seal I needed, Should make the starter as good as new.

Thanks FlyGp

 

Thanks guys! We appreciate the business and wish everyone a safe, healthy, and Merry Christmas!

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Many thanks to Len at XJ4Ever. My intakes arrived today. Only 2 days after placing my order! Everything looks great and I can now have one of my Christmas wishes...carburetors back on the Turbo and with a little luck, a fire up.

Many thanks Len!

 

I bought some intake manifolds from XJ4ever and I'm very pleased! The dealer doesn't even sell them and I was able to get them from this site. Thanks to this site I was able to sync my carbs.

 

I bought some jets a little while back and they arrived very quickly! Great service, great parts, great prices, highly recommended! Thanks Len!

 

I am trying to get a 1981 xj 750 seca running and after searching the web no success in getting parts I stumbled on this site. The selection is fantastic, service spectacular, and the advice priceless. My only complaint is that I did not know how to order parts. Therefore, if you are new to the site and need parts, click on the large banner ad on the upper right corner of this page or email to info@xj4ever.com. You won’t be disappointed.

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Once again Len, congratulations on your excellent service . The parts arrived in Oz in just over a week,faster than I can sometimes get stuff from local suppliers. You can be sure that you will be hearing from me again.

Cheers , and happy new year, Murray

 

starter shipped to 39503?

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Sent Len a PM on the 19th and parts arrived today. Once again, the best service I've seen anywhere.

 

Thanks guy, we appreciate your business and props!

Mercuno.....please send us a PM or e-mail and let me know what year and model bike you are working on.

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

THANKS LEN!!!
You came through again! Clutch cable broke yesterday, I called you late in the afternoon and new origanal cable made it to me in Mobile, AL. in17 hours!!! Man Your The Best!!! Thanks for comming through with the lightning speed and the cost also!
Mike D.

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Len must have invisible gnomes piloting some fast aircraft, and only seems like he's using "legitimate" carriers. I ordered some parts on a Friday, and I mean LATE friday, like 4:30PM, and they were on my doorstep Monday morning.

Seriously Len, you have a time-sharing arrangement with Santa's Elves or something? :lol:

Thanks for the great service, reasonable prices and physics-defying shipping! I will definitely be ordering more parts soon.

-James

 

Re: XJ PARTS FOR SALE---FOR ALL MAXIM, SECA, AND TURBO MODEL

Ordered parts Monday, and received today. Dealing with Chacal was an exceptionally pleasing customer service experience. He corrected some mistakes I made, and helped me through getting my order correct. Not only that, but in 2 short days, I received exactly what I order. Thanks a bunch Len!!